Harahan, LA
A Harahan Timberline HDZ roof with hips and several roof vents
A Harahan roof replacement with a signed HDZ shingle selection and a project photograph documenting the hip caps, roof vents, and surrounding shingle field.
Completion recorded
What the signed proposal included
- GAF Timberline HDZ shingles
- Starter and ridge products
- Flashing and ventilation work
Roof details and scope
The signed project scope selected GAF Timberline HDZ shingles for this Harahan replacement. The proposal also addressed starter and ridge products, flashing, and ventilation. Several other packages appeared in the proposal, making the signed selection important: the options on an estimate do not all become part of the installed roof.
The July photograph looks across intersecting shingled planes. Hip caps lead toward the high point, with a large round vent and smaller rectangular vents nearby. A satellite dish sits near the left edge. These visible details provide a practical checklist for discussing equipment and penetrations before a similar roof is removed. Neighboring roofs in the background are outside this case.
For a replacement with existing rooftop equipment, have the contractor identify what will remain, what needs replacement, and who is responsible for any detach-and-reset work. Ask how each penetration will be flashed and how installation photographs will document the work. The signed scope included decking provisions, but this case does not assign an installed sheet count because the final quantity has not been established from the reviewed records.
Project completion
The roof was photographed on July 2, 2026, and the project reached its job-complete stage later that day. The image documents the visible shingles, hip caps, and vents. The material selection comes from the signed scope; the photograph alone cannot establish the concealed layers or the performance of the ventilation system.
The proposal included a FORTIFIED scope. An issued designation has not been verified for this case.
Planning a similar project?
- Which existing roof-mounted items are included in the roofing scope?
- Are hip and ridge materials identified separately from the field shingles?
- How are decking changes approved and documented during installation?